Bradley Smoker Smoke Generator Smokehouse Adaptor

Bradley Smoker Smoke Generator Smokehouse Adaptor

The Bradley Smoke Generator is a highly adaptable unit that allows you to retrofit almost any small structure into a smoke house. The unit consists of two parts. The stainless steel Smoke Generator advances the bisquettes onto the heat element at a rate of one every twenty minutes. The controls are purposefully limited to a power on/off switch, and a bisquette advance button, used to position the first bisquette on the burner. Thereafter, bisquettes feed automatically.

The second part consists of a stainless steel face-plate, with an adjustable collar onto which the smoke generator fits with two lugs. This allows easy removal from the faceplate to facilitate cleaning and storage with the faceplate remaining attached to the structure used for smoking. 

The unit uses Bradley Flavour Bisquettes. It is particularly well suited to cold smoking in a home made structure of a large volume, and does not need to be insulated. Providing the ambient temperature is low enough:below about 28 deg C, then you will have no difficulty cold smoking. For the other Bradley Smoker models, we recommend the use of the Cold Smoke Adaptor accessory when cold smoking.

An ideal structure might be an old chest freezer, stood upright, the lid for the door, with an 11cm hole in the side for the adaptor, and a vent in the top to allow a natural draft to flow through the structure - important, both for the quality of the smoked product, and to stop smoke being drawn back into the Smoke Generator.

Generator (mm): 180 x 180 x 230
With Feeder Tube: 180 x 230 x 570
Adaptor: 270 mm from wall
Construction: Brushed Stainless Steel
Smoking Element: 125 Watts
Power: 220 - 240 Volt - 50 Hz

This product won the coveted Vesta Award in 2003, not to mention the many prizes for smoked food won by users ever since. 

Our Price £177.99

Out of Stock